Quick Answer
- +Physical bricks are always backwards compatible. Old and new sets share the 8mm stud.
- +Nanoblocks do not fit standard bricks. Different scale — 4mm vs 8mm stud.
- +Standard-scale dinosaur sets do connect to your existing bricks. Check the stud size.
- +Sort by scale first. Then test clutch, use shared baseplates, and build strong.
Why Brick Compatibility Matters
Compatibility saves money. It saves parts. It opens up your creativity. The core idea is simple: standard bricks share the same stud size and spacing. That 8mm stud is the key. When two brands follow it, their bricks lock together with a tight fit and a solid hold.
More parts, less cost
Add cheaper compatible sets to a big collection without starting over.
More colors and shapes
Different brands make different pieces. Mix them for variety.
More freedom
You are not locked into one brand's catalog.
Morebybourn bricks follow the standard stud size and connect with major-brand parts you already own. See the full range at Morebybourn to the gaps in your collection.
Understanding the Two Main Brick Scales
Not all bricks are the same size. There are two main scales. Knowing them saves you from a bad buy.
Standard Scale
8mm studThe classic brick. Most big brands and compatible brands use it. When a set says "compatible with major brands," this is the scale it means.
- + Large builds and display models
- + Kids' sets and family builds
- + Mixing parts from many brands
Micro Scale (Nano)
~4mm studMuch smaller. These tiny bricks make small, detailed models — a 4-inch statue with hundreds of pieces. Great detail. Small footprint.
- + Tiny display models
- + Fine detail work
- !Does NOT connect to standard scale
The two scales do not mix. A micro brick will not lock onto a standard stud. Match scale to scale before you buy.
Is LEGO Batman 2 Backwards Compatible?
This is one of the most common compatibility questions. There are two things people mean. Here is the answer to both.
The Video Game Question
Some ask about the game itself — can the sequel play with older saves or content? That is a software question. It depends on the platform and game version. Check the official platform notes for that answer.
The Physical Brick Question
Yes — CompatiblePhysical brick sets are backwards compatible by design. A brick from a 2012 set fits a brick from a 2024 set. Same stud. Same size. A minifigure from an old Batman set stands on a new baseplate. Everything mixes.
Quick summary: Physical bricks are always backwards compatible. Old parts fit new parts. Mix any theme with any era.
Are Nanoblocks Compatible With LEGO?
This is a scale question. And the answer surprises people.
Are nanoblocks compatible with lego? No. Nanoblocks are micro scale — around 4mm per stud. Standard bricks are 8mm. The studs do not match. A nano brick will not click onto a standard baseplate.
This is not a flaw. It is a design choice. Micro scale exists to make tiny, detailed models. Standard scale exists for larger builds. They serve different goals.
What to do instead
If you love both scales, keep them separate. Build micro models in one scale. Build standard models in another. Display them side by side. They look great together even if they do not connect.
For fine detail on standard builds
Use small standard parts: a 1x1 round plate, a 1x1 tile. These give fine detail and still lock to your build. Browse the detail parts guide for compatible options.
How to Find the Best LEGO-Compatible Dinosaur Sets
Dinosaurs are one of the most loved brick themes. But not all dinosaur sets are equal. Here is how to pick the right one.
Check the Scale and Stud Size
Start here. Confirm the set is standard scale. Most lego compatible dinosaurs use the 8mm stud. Look for 'compatible with major brands' on the product page. Skip micro-scale dino kits if you want to mix them with standard bricks.
Decide Build Type
Dinosaur sets come in several forms. Poseable models have joints for play and display. Static display models are fixed-pose with more detail, best for a shelf. Brick-built skeletons are popular with collectors. Mini dino figures are small, quick builds good for kids and scene-filling.
Check Piece Count and Difficulty
Beginner: 100–400 pieces, one to two hours. Intermediate: 400–1,000 pieces, a weekend build. Expert: 1,000+ pieces, several sessions. Match this to the builder's skill level.
Look at Part Quality
Quality matters most for compatibility. Loose bricks ruin the fit. Look for tight clutch power. Read reviews for words like 'tight fit' and 'holds together'. Skip sets that reviewers call loose or flimsy.
For a range of standard-scale sets that mix cleanly with major brands, explore the collection at Morebybourn. The parts follow the 8mm stud so your lego compatible dinosaurs join the rest of your build with no trouble.
Dinosaur Set Build Types at a Glance
Poseable Model
Play and display
Joints let legs and jaw move
Static Display
Shelf collectors
More detail, fixed pose
Brick Skeleton
Adult collectors
Museum-style bone build
Mini Dino Figure
Kids and scenes
Quick build, scene-filling
How to Mix Brands the Smart Way
Sort by Scale First
Split your bins by scale. Standard in one. Micro in another. This stops the two from mixing by mistake and saves time when you build.
Test Clutch Power
Before a big build, snap a few parts from each brand together. Lift them. If they hold, they mix well. If they slip, use those parts in low-stress spots only.
Use Baseplates as Common Ground
A standard baseplate accepts any standard brick. Use it as the shared floor for a mixed-brand build. Every standard part locks to it, no matter the brand.
Build Strong Connections
Mixed-brand builds get handled a lot. Overlap plates like brickwork. Avoid single stacked columns. Lock each layer to the one below.
Keep Colors Consistent
Different brands make slightly different shades. Group same-shade parts, or use color shifts on purpose for effect. Plan for slight variation.
Common Compatibility Mistakes to Avoid
Mistake: Mixing scales
Fix: Micro and standard do not fit. Keep them in separate bins.
Mistake: Ignoring clutch power
Fix: Loose parts fall off. Test before you commit to a big build.
Mistake: Assuming all brands match colors
Fix: Shades vary across brands. Plan your color blocks carefully.
Mistake: Buying micro when you meant standard
Fix: Check the stud size clearly before you buy any new set.
Mistake: Weak connections in mixed builds
Fix: Lock every layer. Do not stack loose single-brick columns.
Compatibility Quick Reference
| Scenario | Result | Reason |
|---|---|---|
| Old set + new set, same scale | Fits | Always backwards compatible |
| Standard brand A + standard brand B | Fits | Same 8mm stud |
| Nanoblock + standard brick | Does not fit | Different scale (4mm vs 8mm) |
| Micro dino + standard build | Does not fit | Scale mismatch |
| Standard dino set + your collection | Fits | Confirm 8mm stud on box |
Related Guides
- How to Build a LEGO-Compatible Play Table and Set Up Your Figures
Table types, conversion guide, Mattel verdict, and figure setup tips.
- How to Choose and Build With Blocks Compatible With LEGO
COBI verdict, animal scene construction, and 3-step fit test.
- How to Mix LEGO-Compatible Brick Brands and Build Better MOCs
Block Tech verdict, bulk buying, sort system, and MOC layering strategy.
- How to Choose the Best LEGO-Compatible Brands and Parts
Brand landscape map, 5-point evaluation checklist, and sourcing strategy.
Conclusion
Brick compatibility comes down to one thing: stud size. Match the scale and the parts fit. Here is the full recap:
- +Standard scale uses the 8mm stud — bricks mix across brands and eras freely.
- +Physical sets are always backwards compatible. Old and new parts join with no issues.
- +Nanoblocks are micro scale (~4mm). They do not connect to standard bricks.
- +The best dinosaur sets are standard scale with tight clutch power and clear specs.
- +Sort bins by scale, test clutch power, and use shared baseplates for mixed-brand builds.
- +For fine detail on standard builds, use 1x1 standard plates — not nano parts.
Frequently Asked Questions
Is LEGO Batman 2 backwards compatible with older brick sets?+
For physical bricks, yes. Brick sets are backwards compatible by design. A part from an older Batman set fits a newer set. They share the same 8mm stud and standard size. You can mix themes and eras freely. If you mean the video game software, check the official platform notes.
Are Nanoblocks compatible with LEGO and other standard bricks?+
No. Nanoblocks are micro scale, around 4mm per stud. Standard bricks use an 8mm stud. The studs do not match so the two will not connect. Keep them as separate builds. For fine detail on a standard build, use small standard parts like 1x1 round plates instead.
How do I know if a dinosaur set is LEGO-compatible?+
Check the stud size. Most standard-scale dinosaur sets use the 8mm stud and connect to major-brand bricks. Look for 'compatible with major brands' on the product page. Read reviews for words like 'tight fit'. Avoid micro-scale dino kits if you want to mix them with standard bricks.
Can I mix bricks from different brands in one build?+
Yes, as long as they share the same scale and stud size. Standard bricks from different brands lock together on shared baseplates. Test clutch power first. Build strong connections and overlap your plates. Watch for small color-shade differences between brands and plan your color blocks.
What is the difference between standard scale and micro scale bricks?+
Standard scale uses an 8mm stud — the classic brick size, best for large builds and mixing brands. Micro scale, like nanoblocks, uses about a 4mm stud for tiny detailed models. The two scales do not connect to each other. Always match scale to scale when buying parts to combine.